HP LCS60 Installation Manual page 314

UNIX System Software Installation
Switching to Installation Partitions
Installation in progress.
15 . For both the Fujitsu and Seagate ST5660N drives: Installation messages
will continue to scroll as the UNIX System software is installed. This pro-
cedure will continue for approximately 49-60 minutes.
16 . For both the Fujitsu and Seagate ST5660N drives: When the following
message appears, hit the
allow the host to reboot. Do not enter 'bo 0 0'
At the nnn-Diag> or nnn-Bug> prompt, enter 'bo 0 0'.
Press <RETURN> to begin the system shutdown.
17 . For both the Fujitsu and Seagate ST5660N drives: At the Console prompt,
login as root to continue.
18 . For both the Fujitsu and Seagate ST5660N drives: Continue with the pro-
cedures described in Chapter 9 to install the UFS Utility Fixes Tape,
remove the inet package, and install the LCS60 application software.
D-8
Making File Systems
Installing Boot Block
Mounting Installation Partitions
Installing Package(s)
key to continue the shutdown and
Return
Issue 3