Arap Service Example; Connection (Via Modem) - HP LCS60 Installation Manual

ARAP Service Example

Note: In order to edit the CCL script, you should have the AppleTalk Remote
Access Modem Script Workshop software (contact your modem or client
software vendor). The CCL documentation will indicate the supported
baud rates.

Connection (via Modem)

To establish the ARAP connection, perform the following steps:
1 . From the Network Control Panel of the Control Panels folder select
Remote Only. (Refer to Figure F-13.)
2 . Launch the Remote Access Client program and select Guest. (Refer to
Figure F-14.)
3 . Select Remote Access Setup under Setup on the Control Bar (Figure F-15):
Choose Modem; select your CCL Script
—
Choose Port; select modem port
—
— Use the defaults for all other fields
4 . From the Main Screen, Figure F-14:
Enter the phone number.
—
— Use the defaults for all other fields.
Under File, select Save As to save the setup to a file name (for
—
example, lcs60). This will allow you to launch lcs60 the next time
you want to establish the ARAP connection, rather than repeating
this procedure.
5 . From the Main Screen (Figure F-14), select Connect to connect and display
the Remote Access Status window (Figure F-16).
Note: Under Windows, select Activity Log to see log entries for the connec-
tion.
F-22 Issue 3