Table of Contents
Advertisement
Configure Default Route, DNS, and SNMP
[? for help, q to quit]
==>
q
Top>Config>#
Be sure to specify routed with the protocol command to start DNS service at
boot time.
SNMP Manager – snmp
Use the snmp command to define the SNMP manager as shown in the example
below.
Top>Config># snmp
SIMPLE NETWORK MANAGEMENT PROTOCOL (SNMP) CONFIGURATION
1
Display Current Configuration File
2
Modify/Create Configuration File
Enter Menu Selection
[? for help, q to quit, RETURN for menu]
==>
2
Enter Network Administrator's Information [?, q]
==> my name
Enter Machine Location [?, q]
==>
my location
Enter Community Name [?, d, q]
==> public
IP address of SNMP manager for community "public" [?, q]
==> 0.0.0.0
Access right for SNMP manager "0.0.0.0" [r, w, ?, q]
==>
r
Adding the following information to the configuration file:
community public 0.0.0.0 read-only
Confirm? [y, n] y
Enter Community Name [?, d, q]
==>
traps
3-26
Issue 3
Advertisement
Chapters
Table of Contents
