Table of Contents
Advertisement
SLIP Service Examples
ChameleonNFS 4.0
Note:
ChameleonNFS 4.5 is different from ChameleonNFS 4.0. Refer to the
user documentation for specific details.
Before you can make a SLIP connection using ChameleonNFS, you must config-
ure the SLIP interface through Windows; Figures F-10 - F12 show an example
configuration for dynamic IP address acquisition.
1 . Under the Custom window, select Interface and add a SLIP interface.
Figure F-10: Custom Interface Window
2 . Under the Custom Setup window (Figure F-11), configure the following:
IP address (1.1.1.1 for a dynamic IP address)
Modem
Login (Figure F-12)
User Name field = NAC User ID; User Password field = NAC password; Startup
Command field = SLIP dialstring
Issue 3
Port
Dial
F-19
Advertisement
Chapters
Table of Contents
