HP LCS60 Installation Manual page 240

Network interface for ethernet r3.0
Table of Contents

Advertisement

Reload System Software
The following disks will now be formatted:
m197_c0d0
You can safely ignore error messages such as:
Non-Motorola volume id read on unit xx
or
Invalid VTOC read on unit xx
Press <RETURN> to continue with formatting or interrupt (CTRL-c) to abort:
Switching to Installation Partitions
Installation in progress.
10 . Installation messages will continue to scroll as the UNIX System software
is installed. This procedure will continue for approximately 49-60
minutes.
11 . When the following message appears, remove the tape and press the
key to continue the shutdown and allow the host to reboot.
Return
Do not enter 'bo 0 0'
At the nnn-Diag> or nnn-Bug> prompt, enter 'bo 0 0'.
Press <RETURN> to begin the system shutdown.
12 . At the Console prompt, login as root to continue with the UFS Utility
Fixes Tape installation.
9-6
Ready to begin Formatting
Slicing Installation Disk(s)
Activating Swapping To Disk
Making File Systems
Installing Boot Block
Mounting Installation Partitions
Installing Package(s)
Return
Issue 3

Advertisement

Table of Contents
loading

Table of Contents