Table of Contents
Advertisement
Screen F-2:
Continued
(pause, 2000)
(comment, {})
(comment, {Send \r to get DESTINATION prompt})
(send, {})
(pause, 1000)
(comment, {})
(comment, {Send dialstring for morse})
(send, {mlkway/earth/morse.ppp}(cr){})
(pause, 4000)
(comment, {})
(comment, {Switch the packet driver from character mode to packet mode.})
(comment, {})
(changemode, packet)
(comment, {})
(comment, {Send a request to open the LCP layer})
(comment, {Pause to confirm that the lcp and ipcp layers are open.})
(comment, {})
(poll, lcp, open)
(poll, ipcp, open)
Note:
The above dialup script uses the script language slang. WIN PC/TCP
can also use a script language comscrpt; for additional information
contact Apple Computer Co.
PPP Connection
After completing the client configuration procedures described above, establish
the PPP connection as described in this section.
Enter information in the fields shown on the screens; example entries are
Note:
shown in the figures.
From the PC/TCP Main menu shown on the left in Figure F-3, select Dialer. This
will display the Dialer screen shown on the right in Figure F-3.
Issue 3
PPP Service Examples
F-11
Advertisement
Chapters
Table of Contents
