HP LCS60 Installation Manual page 193

AppleTalk, or IPX configuration information (or all) for
the specified session ID. When ppp is specified without a
session ID, the ip, atalk, link, and ipx options are available
to show IP, AppleTalk, link, or IPX configuration informa-
tion for all sessions.
Example The following shows AppleTalk data for a PPP session.
Top>Session># show ppp 1.1 atalk
LCS60 Point-to-Point Session ATALK Configuration:
Sesid State
===== ========
1.1 opened
LOCAL Addr: 2010.1
Zone: Research Lab
Router: 2010.1
PEER Addr: 2010.118
Zone: Research Lab
Router: 2010.1
Top>Session>#
Name trace
Synopsis trace [ -nv][-w filename] service-type [sesid ...]
Description The trace command gives tracing information on a per-
session basis. The output includes connection state, local
address, foreign address, fiber channel number, and data
switch address. The -v flag gives a verbose output; -n
displays the remote user IP address rather than the sym-
bolic name; and -w puts the command output in the
named file (filename). The trace command requires the user
to specify a service-type.
Issue 3
Feb 6 14:04:45
Server Info
=================
Class: 1
Imp ID: V1.1 Route Proto: none
Name: morse Broadcast Supp: none
Class: 0
Imp ID: Route Proto: none
Name: Broadcast Supp: none
lcsadm Interface
AT Comp: none
AT Comp: none
8-9