HP LCS60 Installation Manual page 331

FTP
macdel mname
Delete the macro mname.
macls [mname]
List the names of defined macros or the definition of the macro named
mname.
mdelete remote-file ...
Delete the specified files on the remote host. If globbing is enabled, each
remote-file will first be expanded.
mdir remote-file ... local-file
Obtain an extended directory listing of multiple files on the remote host
and place the result in local-file. Globbing must be turned off when using
this command. Note that the specification of local-file is mandatory.
mget remote-file ...
Retrieve the specified files from the remote host and place them in the
current local directory. If globbing is enabled, the specification of each
remote file will first be expanded.
mkdir directory-name
Make a directory on the remote host.
mls remote-file ... local-file
Obtain an abbreviated listing of multiple files on the remote host and place
the result in local-file. Globbing must be turned off when using this com-
mand. Note that the specification of local-file is mandatory.
mode [mode-name]
Set the file transmission mode to mode-name. Valid modes are block,
compressed, and stream (default). Only the stream mode is currently sup-
ported.
modtime remote-file
Display the last modification time of the remote file.
mput local-file ...
Transfer multiple files from the current local working directory to the
current working directory on the remote host.
newer remote-file
Get the specified remote file if a local file of that name does not exist or if
the remote file has a later modification date than the local file of the same
name.
nlist [rfile [lfile] options [[rfile] lfile]]
List the name(s) of the files in the current working directory or the speci-
fied (rfile) file or directory on the remote host. Specified options are sup-
plied to the remote list command (for example, the UNIX ls command or
the VMS dir command). The list can be displayed on the standard output
device or placed in the specified (lfile) local file.
Issue 3
FTP ( 1 )
E-13