Configure Default Route, Dns, And Snmp - HP LCS60 Installation Manual

==> 3
The LCS60 IPX Parameters are configured as follows:
Ethernet Network Number ..... < 1562 >
Virtual Network Number ...... < 57 >
Ethernet Frame Type ......... < Ethernet II >
CAUTION: Please refer to the I&A Guide for instructions
about configuring this feature.
IPX CONFIGURATION MANAGEMENT
1 Ethernet interface configuration parameters
2 Virtual (PPP) interface configuration parameters
3 Display all Parameters
Enter Menu Selection
[ ? for help, q to quit, RETURN for menu ]
==> q
This completes your configuration of protocols and services on this LCS60.
To start ALL configured protocols and services, enter the command "lcsadm" and
then from the top command directory type "start all".
Top>Config>#

Configure Default Route, DNS, and SNMP

The following optional commands allow you to:
Define a default route
Define the Domain Name Server
Define an SNMP manager.
Issue 3
Configure Protocols and Gateway Services — srvsetup
3-23