Connection Verification
Verify the validity of all connections before considering the LCS60 ready to
assume its role in the network.
Figure 9-2: Verifying Connections, Example Network
LCS60
LCS60
Router
LCS60 to Data Switch Connected Host Verification (dkcu)
Use the dkcu command to verify the connectivity between the local LCS60 and a
data switch connected host. From the LCS60 system console, use the following
format:
dkcu call address
where call address is the call address of a fiber-connected host.
As an example, refer to the network in Figure 9-2. In this example, to verify the
connection between the LCS60 morse and the data switch connected host watson
(connection A), enter:
9-28
Lucent Data Switch
Asynchronous Host
LCS200
Remote Access
Clients
Modem
Pool
Issue 3