HP LCS60 Installation Manual page 167

Screen 7-1:
Continued
==> nac
Enter Inactivity timeout minutes
[ Type q to QUIT, ? for HELP, or press RETURN for default of "n" ]
==> 2
*** NOTICE ***
Entering port < 4419 > to provide < telnet > service as follows:
> Pre-Defined call address:
>
> mlkway/earth/yard
- TCP window size .................. 1024 (default)
- 8-bit character mode ............. Enabled
- Inactivity timeout(minutes) ...... 2
- Wait-for-Input timeout(minutes) .. 2
- NOHUP ............................ Enabled
- 2WAY ............................. Enabled
- SID .............................. Enabled as "nac"
Enter this service port?
Enter y,n ==> y
*** Port < 4419 > has been added.
Press RETURN to continue ==>
TCP-TO-ASYNCHRONOUS GATEWAY SERVICE CONFIGURATION MENU
1. Display/Change the LCS60 call address prompt
2. Add a service port
3. Delete a service port
4. Change/modify a service port
5. Display service ports
Enter Menu Selection
[ Type q to QUIT or ? for HELP ]
==> 2
Enter service port number
[ Type q to QUIT or ? for HELP ]
==> 2511
Enter service type "telnet", "socket", or "directory" for port 2511
[ Type q to QUIT or ? for HELP ]
==> directory
Issue 3
LCS60 Configuration and Connection for Gateway Service
Return
Screen 7-1: continued on next page
7-5