Screen 9-1: How To Enter System Responses - HP LCS60 Installation Manual

Reload System Software
6 . Enter bo 0 40 COREunix at the 197-Bug> prompt. This will generate ins-
tallation screens ending with the Screen 9-1. This information will not be
repeated; use Screen 9-1 as you proceed with installation for instructions
on entering responses.

Screen 9-1: How to Enter System Responses

How to Type Responses during Installation
When typing responses:
<response><RETURN>
<CTRL>-h
<CTRL>-u
<CTRL>-r
<CTRL>-s
<CTRL>-q
<CTRL>-z
<CTRL>-c
?<RETURN>
Press <RETURN> to continue.
Note: If you have not inserted the tape the following will be displayed.
Booting from: VM197, Controller 0, Drive 40
Loading: COREunix
Boot logic error
Packet status: 0000
Additional Error Status: 0002
7 . Enter when Screen 9-1 is displayed; this will lead to the installa-
Return
tion screen shown below. Continue with the dialogue as shown:
9-2
Enters <response>
Erases the last character typed
Erases the entire line
Reprints the entire line
Pauses output to the screen
Resumes output to the screen
Suspends the installation
Cancels the installation and returns here
Gets help for the current screen
Issue 3