Document Organization - HP LCS60 Installation Manual

Document Organization

This installation and administration guide is arranged as follows:
Feature Description
Hardware Installa-
tion
General Software
Configuration
PPP Configuration
and Administration
SLIP Configuration
and Administration
ARAP Configura-
tion and Administra-
tion
Gateway Services
Configuration and
Administration
Administration
Maintenance
Originating Group
Security
StarKeeper II NMS
User Error Messages
Issue 3
Chapter 1 describes the LCS60 and its supported ser-
vices.
Chapter 2 gives all the information needed to install the
LCS60.
Chapter 3 details the basic configuration procedures for
the LCS60 and gives examples of configuring the sup-
ported services (PPP, SLIP, ARAP, Gateway).
Chapter 4 gives the specific instructions for configuring
and administering the PPP service.
Chapter 5 gives the specific instructions for configuring
and administering the SLIP service.
Chapter 6 gives the specific instructions for configuring
and administering the ARAP service.
Chapter 7 gives the specific instructions for configuring
and administering the Async-to-TCP service, including
details of the UUCP feature and the Telnet service.
Chapter 8 provides detailed instructions on administer-
ing the LCS60 system.
Chapter 9 provides maintenance procedures for reload-
ing and removing the software, performing board diag-
nostics, and verifying connections.
Appendix A briefly defines the originating group secu-
rity built into the LCS60 using the srvtab files.
Appendix B provides configuration instructions for the
StarKeeper II NMS and lists the LCS60 alarms reported
by the StarKeeper II NMS.
Error messages that the user may encounter are listed in
Appendix C.
1-1