HP LCS60 Installation Manual page 300

Outgoing Call Error Messages
Receive window too small
The call could not be completed because the receive window size is too
small.
Remote node not answering
A connection cannot be completed because a data switch trunk or com-
mon data switch control computer database somewhere in the network
path is inoperable.
Server already exists
This host attempted to set up a CommKit Host Interface server, but the
data switch control computer database already knows a server by that
name.
Server not answering
The requested server name is not in service. No interface hardware is
assigned to the requested name. The interface hardware assigned to the
requested name is not in service or is not operational. The remote server
may not answer for reasons of its own.
Service mismatch
The service on the SIM did not match the request.
SIM all channels busy
All assigned ports/channels on the SIM are in use.
SIM bad contact
The call could not be completed due to SIM resource congestion.
SIM no access
The call was denied by the remote side.
SIM no contact
The SIM rejected the call.
Splice completed
The connection endpoints were successfully spliced together.
C-8 Issue 3