Table of Contents
Advertisement
UNIX System Software Installation
Add the following line to the file:
"SEAGATE"
"ST5660N"
Note:
Separate the fields above using tabs only; spaces are not allowed.
Write and quit the file.
10 . For the Seagate ST5660N drive only: Enter
installation menu and continue as shown below:
#
Ctrl-D
Leaving maintenance shell:
UNIX SYSTEM V/88 Release 4 Upgrade/Installation
You have the following options:
1) Full installation
2) Upgrade an existing R40V2 or later system
3) Exit without doing anything (reboot)
4) Enter maintenance mode
Enter option number of choice: [ 1-4 ]
You have interrupted the installation or upgrade
No modifications to the system have yet taken place.
1) Restart the installation.
2) Reboot the machine.
3) Shutdown the machine.
Enter option number of choice: [ 1-3 ] ( 1 ) 1
Analyzing configuration...
11 . For the Seagate ST5660N drive only: Enter
Type Responses" screen is displayed again.
12 . For both the Fujitsu and Seagate ST5660N drives: Continue with the dialo-
gue that follows:
D-4
mfuj2624
Ctrl-C
Installation/Upgrade Interrupt
7
"SEAGATE ST5660N"
at the # to return to the
Ctrl-D
once the "How to
Return
Issue 3
Advertisement
Chapters
Table of Contents
