Accessories - HEIDENHAIN POSITIP 8013 ACTIVE Operating Instructions Manual

Transport and storage | Items supplied and accessories
3.3.2

Accessories

Software options need to be enabled on the product via a license key.
Before you can use the associated hardware components, you need to
enable the respective software option.
Further information:
The following accessories are optionally available and can be ordered from
HEIDENHAIN:
Acces- Name
sories
For operation
POSITIP 8000 NC2
software option
For installation
KT 130 edge finder
Power cable
USB connecting cable
Cables
For mounting
Multi-Pos holder
Duo-Pos stand
Multi-Pos stand
Single-Pos stand
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
"Enabling the Software options", Page 88
Description
Control of two axes (servo
motors and stepper motors)
for controlling machine
tools
Touch probe for probing
a workpiece (for setting
presets)
Power cable with European
plug (type F), length: 3 m
USB connecting cable for
connector type A to type B
For information on connect-
ing cables, see "Cables
and Connectors for
HEIDENHAIN Products"
brochure.
Holder for fastening the
device on an arm, contin-
uously tiltable within an
angle of 90°, fixing hole
pattern 100 mm x 100 mm
Stand for rigid mounting,
inclination angle 20° or
45°, fixing hole pattern
100 mm x 100 mm
Stand for continuously
variable tilting within an
angle of 90°, fixing hole
pattern 100 mm x 100 mm
Stand for rigid mounting,
inclination angle 20°, fixing
hole pattern 100 mm x 100
mm
Part number
1089228-01
283273-xx
223775-01
354770-xx
---
1089230-04
1089230-02
1089230-03
1089230-01
3
31