Table of Contents
Advertisement
Settings | Service
15.7.14 Program execution
Settings ► Service ► OEM area ► Settings ► Program run
Path:
Parameter
Automatic advance on reaching
upper spindle sleeve final
position
M functions
15.7.15 Configuring M functions
Settings ► Service ► OEM area ► Settings ► Program run ► M functions
Path:
Parameter
Number of the M function
Select image for dialog during
program run
Upload image file
Remove the entry
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Explanation
Automatic advance when executing hole patterns always occurs
when the upper spindle sleeve limit switch is reached
Settings: ON or OFF
Default value: OFF
For the configuration, see "Configuring M functions", Page 275
Explanation
Enter the number of the new M function
Setting range: M2.0 ... M120.0 (0: The output assigned to
the M function is switched to inactive)
Setting range: M2.1 ... M120.1 (1: The output assigned to
the M function is switched to active)
Setting range: M2.2 ... M120.2 (2: The output assigned to
the M function generates a high active pulse of 8 ms)
Select the desired image for display during program run
Copies a selected image file to the storage location /Oem/
Images
File format: PNG, JPG, PPM, BMP or SVG
Image size: Max. 100 x 70 px
Remove the entry
15
275
Advertisement
Table of Contents
