15
Overrides
15.6.6
Path:
Parameters
Input for feed override
Umax
Lower dead band
Adding M functions
15.6.7
Path:
Parameters
Name
250
Settings ► Axes ► General settings ► Overrides
Settings ► Axes ► General settings ► M functions ► +
Explanation
Assignment of the analog input for the feed rate override accord-
ing to pin layout
Default value: Not connected
Definition of the maximum output voltage
Setting range: 0 mV ... 5000 mV
Default value: 5000
Definition of the lower dead band
Setting range: 0 % ... 100 %
Default value: 0.000
Explanation
Entry of the name for the new M function
Setting range: M100 ... M120
For the configuration, see "Configuring M functions", Page 251
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Settings | Axes