Table of Contents
Advertisement
11
11.3
Executing blocks
You can select a positioning function or machining pattern, and execute that block.
Executing blocks
186
If enabling signals are missing, the running program is halted and the
drives of the machine are stopped.
Further information:
Manufacturer's documentation for the machine
Tap Create on the status bar
A new block is displayed
or
The last programmed MDI block with all parameters is loaded
Select the desired block type in the Block type drop-down
list
Define the relevant parameters, depending on the block type
Further information:
To load the current axis position, tap Actual position capture
in the appropriate input fields
Confirm each entry with RET
To run the block, tap END
The positioning aid is displayed
If the simulation window is active, the current block is
visualized
User intervention may be required, depending on the block;
the wizard will display the relevant instructions
Follow the instructions of the wizard
When you are using a machine tool with NC-controlled axes
and have enabled the POSITIP 8000 NC2 software option on
the product, you may have to press the NC START key on the
machine tool
With multi-step blocks, such as machining patterns, tap Next
to proceed to the next step in the wizard
"Block types", Page 205
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
MDI mode | Executing blocks
Advertisement
Table of Contents
