Overview - HEIDENHAIN POSITIP 8013 ACTIVE Operating Instructions Manual

15
15.1

Overview

This chapter describes the setting options and the associated settings parameters
for the product.
The basic setting options and settings parameters for commissioning and product
setup are outlined in the respective chapters:
Further information:
Further information:
Short description
Function
General
Sensors
Interfaces
User
Axes
Service
Activation
228
"Commissioning", Page 83
"Setup", Page 113
Depending on the type of user that is logged in to the product, settings
and settings parameters can be edited and changed (edit permission).
If a user logged in to the product has no edit permission for a setting or
an settings parameter, the setting or settings parameter is grayed out
and cannot be opened or edited.
Depending on the software options that have been activated on the
product, various settings and settings parameters are available in the
Settings menu.
For example, if the POSITIP 8000 NC2 software option is not active on
the product, the settings parameters required for this software option
are not displayed on the product.
Description
General settings and information
Configuration of sensors and sensor-dependent functions
Configuration of interfaces and network drives
Configuration of users
Configuration of connected encoders and error compensa-
tion
Configuration of software options, service functions and
information
Tap Settings in the main menu
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Settings | Overview