8
8.1
Overview
This chapter contains all the information necessary for setting up the product.
During setup, the (Setup) engineer configures the unit for use on machine tools in
the respective application. This includes, for example, setting up operators as well
as creating preset tables and tool tables.
114
Make sure that you have read and understood the "Basic Operation"
chapter before performing the activities described below.
Further information:
"Basic operation", Page 53
The following steps must be performed only by qualified personnel.
Further information:
"Personnel qualification", Page 25
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Setup | Overview