Calling The Functions Of The Oem Bar - HEIDENHAIN POSITIP 8013 ACTIVE Operating Instructions Manual

6

Calling the functions of the OEM bar

6.10.2
You can control special functions using the operating elements in the OEM bar.
Further information:
Setting spindle speed
Programming spindle speed
Activating the coolant
Setting tool axis to zero
C
78
The operating elements that are available on the OEM bar depend on
the configuration of the device and of the connected machine tool.
Further information: "Configuring the OEM bar", Page 105
"Configuring special functions", Page 109
Tap the Spindle speed field on the OEM bar
The product applies the predefined voltage value at which
the spindle of the connected machine tool is brought to the
selected rotational speed (with no load on the spindle)
Tap or long-press + or – to bring the spindle to the desired
rotational speed
Long-press the desired Spindle speed field on the OEM bar
The background color of the field is highlighted in green
The product applies the current spindle speed as the nominal
value and displays it in the Spindle speed field
Tap Coolant on the OEM bar
The product activates the coolant supply of the connected
machine tool
Long-hold Zero tool axis on the OEM bar
The device sets the tool axis to zero
Tap Zero tool axis on the OEM bar
The device resets zeroing of the tool axis
Zeroing the tool axis can also be implemented with this function
during the execution of a block.
Zeroing a tool axis does not overwrite any preset values or tool data.
If a preset value is set for the tool axis in the position display, zeroing
of the tool axis is reset again.
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Basic operation | OEM bar