Table of Contents
Advertisement
6
6.6
Setting the language
The default language for the user interface is English. You can switch the user
interface to the desired language.
6.7
Performing a reference mark search after startup
If the reference mark search is active on the product, then a wizard will ask you to
traverse the reference marks of the axes.
After logging in, follow the instructions of the wizard
The Reference symbol stops blinking upon successful completion of the
reference mark search
Further information:
62
Tap Settings in the main menu
Tap User
The logged-in user is indicated by a check mark
Select the logged-in user
The language selected for the user is indicated by a national
flag in the Language drop-down list
Select the flag for the desired language in the Language
drop-down list
The user interface is displayed in the selected language
If "Reference mark search after unit start" is active, then all of the
unit's functions will be disabled until the reference mark search is
successfully completed.
Further information:
"Reference marks (Encoder)", Page 256
"Activating the reference mark search", Page 93
Basic operation | Setting the language
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Advertisement
Table of Contents
