Overview - HEIDENHAIN POSITIP 8013 ACTIVE Operating Instructions Manual

10
10.1

Overview

This chapter describes the "Manual operation" mode and how to execute simple
machining steps in this mode on a workpiece.
Short description
By traversing the reference marks on the encoder scales, you make it possible to
define an absolute position. When you have completed the reference mark search
in the Manual operation mode, you then set the presets that will be used as the
basis for machining the workpiece compliant to a dimensional drawing.
The following sections describe how to measure positions and select the tools for
simple machining operations in the Manual operation mode.
Activation
1
Figure 36: Manual operation menu
1 Axis key
2 Reference
3 DRO screen
4 Clear
5 Status bar
6 Spindle speed (machine tool)
166
Make sure that you have read and understood the "Basic Operation"
chapter before performing the activities described below.
Further information: "Basic operation", Page 53
Presetting in the Manual Operation mode is required in order to use the
product in MDI mode.
Further information: "MDI mode", Page 177
Tap Manual operation in the main menu
The user interface for manual operation is displayed
2 3 4
6
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Manual operation | Overview
5