Configuring M Functions; Special Settings - HEIDENHAIN POSITIP 8013 ACTIVE Operating Instructions Manual

Settings | Axes
15.6.8

Configuring M functions

Settings ► Axes ► General settings ► M functions ► M100 ... M120
Path:
Parameters
Name
Digital output
Remove

Special settings

15.6.9
Settings ► Axes ► General settings ► Special settings
Path:
Parameters
Electronic axis clamping on axis
halt
Only single axis movement via
jog buttons
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Explanation
Entry of the name for the M function
Setting range: M100 ... M120
Assignment of the digital output for the M function according to
pin layout
Default value: Not connected
Removal of the selected M function
Explanation
Setting for electronic axis clamping when the axis is at a stand-
still
Settings:
ON: The axis is clamped on standstill of the axis
OFF: The axis is not clamped on standstill of the axis
Default value: OFF
Definition of the axis movements that are possible with the
traverse keys
Settings:
ON: Only a single axis can be moved
OFF: Several axes can be moved simultaneously
Default value: OFF
15
251