Simulation Window - HEIDENHAIN POSITIP 8013 ACTIVE Operating Instructions Manual

Settings | General
Parameter

Simulation window

Simulation window
15.2.4
Settings ► General ► Simulation window
Path:
Parameter
Line thickness of tool position
Color of tool position
Line thickness of current
contour element
Color of current contour
element
Tool path
The Undo buttons enable the color definitions of the simulation window
to be reset to factory settings.
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Explanation
Configuration of the simulation window in the MDI and Program
Run modes of operation.
Further information: "Simulation window", Page 233
Explanation
Line thickness for displaying the tool position
Settings: Standard or Bold
Default value: Standard
Definition of the color for displaying the tool position
Setting range: Color scale
Default setting: Orange
Line thickness for displaying the current contour element
Settings: Standard or Bold
Default value: Standard
Definition of the color for displaying the current contour element
Setting range: Color scale
Default setting: Green
Use of the tool track
Settings: ON or OFF
Default value: ON
15
233