Overview - HEIDENHAIN POSITIP 8013 ACTIVE Operating Instructions Manual

13
13.1

Overview

This chapter describes the "Programming" mode of operation and how to create
new programs and edit existing programs in this mode.
Short description
The product uses programs for recurring tasks. To create a program you define
various blocks, such as positioning functions or machine functions. The program
is then created from the sequence of blocks. You can save a maximum of 1000
blocks in a program.
Activation
Figure 46: Programming menu
1 View bar
2 Toolbar
3 Program management
204
Make sure that you have read and understood the "Basic Operation"
chapter before performing the activities described below.
Further information: "Basic operation", Page 53
Programming does not require connecting the product to a machine
tool.
Tap Programming in the main menu
The user interface for programming is displayed
1
3
The status bar and the optional OEM bar are not available in the
Programming menu.
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Programming | Overview
2