Table of Contents
Advertisement
5
5.3
Product overview
The connections on the rear panel of the device are protected by dust protection
caps from contamination and damage.
Contamination or damage may result if the dust protection caps are
missing!
If no dust protection caps are fitted to unused connections, this may impair the
proper functioning of the contacts or destroy them.
Remove dust protection caps only when connecting measuring devices or
peripherals
If you remove a measuring device or peripheral, re-attach the dust protection
cap to the connection
Rear panel without dust protection caps
11
Figure 10: Rear panel
Connections that are independent of software options:
3
X1 to
1 V
PP
5
X32: USB 2.0 Hi-Speed connection (Type A) for printer or USB mass storage device
6
Speaker
7
Functional ground connection as per IEC/EN 60204-1
4
X116: RJ45 Ethernet connection for communication and data exchange with subse-
quent systems or PC
2
X112: 15-pin D-sub connection for touch probes (e.g. HEIDENHAIN touch probe)
42
The type of connections for encoders may vary depending on the
product version.
X3: Device variant with 15-pin D-sub connections for encoders with
interface
NOTICE
1
10
9
8
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Installation | Product overview
2
3
4
5
6
7
Advertisement
Table of Contents
