Backup Configuration - HEIDENHAIN POSITIP 8013 ACTIVE Operating Instructions Manual

Setup | Backup configuration

Backup configuration

8.4
The settings of the product can be backed up as a file to make it available after a
reset to the factory default settings or for installation on multiple products.
Complete backup
During a complete backup of the configuration, all settings of the product are
backed up.
Further information:
Safely removing a USB mass storage device
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Tap Settings in the main menu
Tap Service
Open in the sequence
Backup and restore configuration
Backup configuration
Tap Complete backup
If required, connect a USB mass storage device (FAT32
format) to a USB port of the product
Select the folder to which you want to copy the configuration
data
Specify a name for the configuration data,
e.g. "<yyyy-mm-dd>_config"
Confirm the entry with RET
Tap Save as
Tap OK to confirm the successful backup of the configuration
The configuration file was backed up
"Backup and restore configuration", Page 267
Tap File management in the main menu
Navigate to the list of storage locations
Tap Safely remove
The message The storage medium can be removed now.
appears
Disconnect the USB mass storage device
8
143