Table of Contents
Advertisement
Settings | Axes
15.6.19 Software limit switches
Settings ► Axes ► X or Y or Z ► Software limit switches
Path:
Parameters
Software limit switches
Limit switch in positive direction
Limit switch in negative
direction
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
Explanation
Use of the software limit switch
Settings: ON or OFF
Default value: OFF
Distance (in mm) in the positive direction from the machine
datum to the software limit switch (including Reference point
displacement, if activated)
Default value: 0
Distance (in mm) in the negative direction from the machine
datum to the software limit switch (including Reference point
displacement, if activated)
Default value: 0
15
261
Advertisement
Table of Contents
