Machining Patterns - HEIDENHAIN POSITIP 8013 ACTIVE Operating Instructions Manual

MDI mode | Block types
11.2.2

Machining patterns

You can define various machining patterns to machine complex shapes. From the
data you enter, the product calculates the geometry of the machining patterns and
optionally displays them in the simulation window.
Before defining a machining pattern, you must
Define a suitable tool in the tool table
Select the tool on the status bar
Further information:
In the appropriate input fields you can load the current axis position with
Actual position capture.
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
"Creating a tool table", Page 134
11
181