Commissioning | Steps for commissioning
7.3
Steps for commissioning
Loss of or damage to configuration data!
If the product is disconnected from the power source while it is on, the
configuration data can be lost or corrupted.
Back up the configuration data and keep the backup for recovery purposes
7.3.1
Basic settings
Setting the date and time
Further information:
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
NOTICE
Tap Settings in the main menu
Tap General
Tap Date and time
The set values are displayed in the following format: Year,
month, day, hour, minute
To set the date and time in the middle line, drag the columns
up or down
Tap Set to confirm
Select the desired format in the Date format list:
MM-DD-YYYY: Display as month, day, year
DD-MM-YYYY: Display as day, month, year
YYYY-MM-DD: Display as year, month, day
"Date and time", Page 237
7
87