Setting The Spindle Speed - HEIDENHAIN POSITIP 8013 ACTIVE Operating Instructions Manual

12
Activating the simulation window
Modifying the contour view
12.2.5

Setting the spindle speed

You can control the spindle speed depending on the configuration of the
connected machine tool.
200
Tap Graphic-Position
The simulation window for the currently selected block
appears
Tap Graphic on the view bar to enlarge the simulation
window
The parameter view is hidden and the simulation window is
enlarged
Tap Detail view
The detail view shows the tool path and the possible
machining positions for the currently selected block
Tap Overview
The overview shows the entire workpiece
Tap or long-press + or – to set the spindle speed to the
desired value
or
Tap the Spindle speed input field, enter the value and tap
RET to confirm
The product applies the entered spindle speed as the
nominal value and controls the spindle of the machine tool
accordingly
Program run | Using the program
HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018