Drilling Out The Through Hole - HEIDENHAIN POSITIP 8013 ACTIVE Operating Instructions Manual

Quick Start | Machining a through hole (manual operation mode)
9.4.2

Drilling out the through hole

HEIDENHAIN | POSITIP 8013 ACTIVE | Operating Instructions | 01/2018
On the machine tool, insert the Ø 19.8 mm drill into the
spindle
Tap Tools on the status bar
The Tools dialog appears
Tap Drill 19.8
Tap Confirm
The associated tool parameters are applied automatically
The Tools dialog is closed
On the product, set a spindle speed of 400 1/min
On the OEM bar: Tap Coolant ON
Drill out the through hole and retract the spindle
On the OEM bar: Tap Coolant OFF
You have successfully drilled out the through hole
9
151