Setting Mode; Changing The Display Language - Yamaha TS-P User Manual

8. Other functions

8.2 Setting mode

1
When you start the HT1 while holding down
as shown below. From this screen, you can change the LCD display language
(Japanese/English) if needed.
"Settings" screen
2
Settings
Serial port
Language
Back light
Brightness B
Brightness GC
3
Brightness GB
Brightness W
CLR: Go to Menu
4
In Setting mode, do not change any settings other than the LCD display language
(Japanese/English).
CAUTION
After changing the setting, press
NOTE
5

8.2.1 Changing the display language

Move the cursor to "Language" and press
1
6
The language can now be changed. Selectable options are shown in the comment
area.
7
8
Use
2
press
9
Press
3
This returns to the "Settings" screen.
H-46
HT1 Operation Guide
English
ON min.
31
10
12
0
Settings
Serial port
Language English
Back light ON
Brightness B 31
Brightness GC 10
Brightness GB 12
Brightness W 0
Japanese
English
or to select the desired language (Japanese/English) and
.
.
CLR
, the "Settings" screen appears
FUNC
to enter the main menu screen and enable the change.
CLR
.
min.