Table of Contents
Advertisement
Safety cautions
Use the controller and robot only in the prescribed
combinations.
Unsuitable combinations could result in fires and equipment failure.
Save the controller's internal data to an external
memory device.
The controller's internal data could be unexpectedly lost, and should
therefore be backed up to an external device.
Do not use solvents such as thinner, benzene, or
alcohol, etc., to wipe (clean) the HT1 surfaces.
Doing so can cause the surface sheet and printing to peel off, and
can cause equipment failure. The HT1 surface should be gently
wiped with a soft, dry cloth.
Do not use a hard or pointed object to operate the
HT1 keys.
Doing so could scratch the keys and cause malfunctions and
equipment failure. The HT1 keys should be operated with the
fingertips.
When disposing of this product, it must be handled as
industrial waste.
Either dispose of the product in accordance with the local
regulations, or engage a commercial disposal service to handle the
disposal.
xiv
CAUTION
Advertisement
Table of Contents
