CareFusion Alaris SE User Manual page 49

Programming
\
Program Rate and Volume (Continued)
10. To start multi-step infusion, press run soft key or
key.
HOLD
Program Volume and Time
1. Press Volume and Time soft key
2. Enter a and press
VTBI
3. Enter hours and press
4. If desired, enter minutes (
Volumetric rate is automatically calculated and displayed.
5. To approve all displayed information and advance to
of infusion sequence, press ok soft key.
STEP 2
6. To set up each additional step of infusion sequence,
repeat steps through
1
7. When all steps have been entered and accepted, press
done soft key.
Review page displays three sequence steps at a time.
User Manual—Alaris SE Pump, Rev2.X
Models 7100/7130, 7200/7230
Multi-Step (Continued)
Program (Continued)
key.
ENTER
key.
ENTER
- ) and press
0 59
.
5
/
RUN
key.
ENTER
OPTIONS
A B
A
Rate= 25.0 mL/h
VTBI= 5.0 mL
VI= 0.0 mL
STEP 1 of 3
menu setup run
A B OPTIONS
A
STEP 1
Rate= ----- mL/h
VTBI= 5.0 mL
Time= -- h -- min
menu
A B OPTIONS
A
STEP 1
Rate= ----- mL/h
VTBI= 5.0 mL
Time=0h -- min
m e n u
Multi-Step
43