Table of Contents
Advertisement
Regulations and Standards
Electromagnetic Environment (Continued)
Compliance levels raised by
a.
At
z and
b.
80 MH
800 MH
These guidelines might not apply in all situations. Electromagnetic propagation is affected by absorption and
c.
reflection from structures, objects, and people.
The compliance levels in the
d.
of
z to
80 MH
2.5 GH
might cause interference if inadvertently brought into patient areas. For this reason, an additional factor of
is used in calculating the recommended separation distance for transmitters in these frequency ranges.
10/3
Field strengths from fixed transmitters (such as base stations for radio [cellular/cordless] telephones and
e.
mobile radios, amateur radio,
accuracy. To assess the electromagnetic environment due to fixed
survey should be considered. If the measured field strength in the location in which the Alaris SE pump is used
exceeds the applicable
If abnormal performance is observed, additional measures might be necessary, such as reorienting or
relocating the Alaris SE pump.
Over the frequency range of
f.
124
Compliance (Continued)
Table 3
Electromagnetic Immunity—Life Support Equipment
IEC 60601-2-24
z, the higher frequency range applies.
frequency bands between
ISM
z, are intended to decrease the likelihood that mobile/portable communications equipment
/
radio broadcast,
AM
FM
compliance level, the Alaris SE pump should be observed to verify normal operation.
RF
kHz to
150
80 MH
(Continued)
.
kHz and
150
broadcast) cannot be predicted theoretically with
TV
z, field strengths should be less than [
z, and in the frequency range
80 MH
transmitters, an electromagnetic site
RF
]
/m.
V
V
1
User Manual—Alaris SE Pump, Rev2.X
Models 7100/7130, 7200/7230
Compliance
Hide quick links:
Advertisement
Table of Contents
