Resistance Trend Graphs - CareFusion Alaris SE User Manual

Dynamic Monitoring System
Monitoring Options—Resistance Mode (Continued)

Resistance Trend Graphs

In Resistance and High Resistance monitoring modes, a trend
graph displays flow resistance over time. Trend graphs of
minutes, hour,
15 1 4
normal operation when enabled through the hospital
configuration settings.
Downstream Occlusions are indicated by a tick mark ( ) at the
top of the trend screen.
View Graph
1. Select applicable channel, as necessary.
Trend graph is not available when the split screen is
displayed.
2. Press
OPTIONS
3. Press Resistance Trend soft key.
4. To change graph time frame, press time soft key.
• A dashed horizontal line represents current resistance
alert level.
• Gaps in graph might indicate noninfusing conditions;
such as turned off, on hold, in alarm.
• If channel has been placed in Pressure Monitoring
mode for some portion of a trend graph window,
resistance data is not available and zero values are
plotted.
• A tick mark ( ) at top of graph indicates an occlusion.
• When viewing Resistance Trend Graphs in High
Resistance mode,
User Manual—Alaris SE Pump, Rev2.X
Models 7100/7130, 7200/7230
hours, and hours are available during
12
key.
is displayed under graph.
HI RESIST
Monitoring Options—Resistance Mode
OPTIONS
A B
100%
50
0
-12h now
RESISTANCE
return clear
time
A B
100%
50
0
now
-12h HI RESIST
return clear time
A
OPTIONS
A
55