CareFusion Alaris SE User Manual page 128

Regulations and Standards
Electromagnetic Environment (Continued)
Emissions Test
IEC 61000-4-11
Voltage Dips, Short
Interruptions, and
Voltage Variations (b)
is the mains voltage prior to application of the test level.
a. AC
U
T
b. Performed at the minimum and maximum rated input voltage.
122
Compliance (Continued)
Table 2
Electromagnetic Immunity
IEC 60601-1-2
(a)
Test Level
<5% U <5% U
T
(>95% dip in U ) (>95% dip in U
T
for 0.5 cycle for 0.5 cycle
40% U 40% U
T
(60% dip in U ) (60% dip in U
T
for 5 cycles for 5 cycles
70% U 70% U
T
(30% dip in U ) (30% dip in U
T
for 25 cycles for 25 cycles
<5% U <5% U
T
(>95% dip in U ) (>95% dip in U
T
for 5 seconds for 5 seconds
(Continued)
Compliance
(a)
Level
Mains power quality should be that of a
T
) typical commercial or hospital environment.
T
If continued operation of the Alaris SE pump
is required during power mains
T
interruptions, it is recommended that the
)
T
Alaris SE pump be powered from an
uninterruptible power supply or a battery.
T
The Alaris SE pump does employ an
)
T
internal short duration battery.
T
)
T
Electromagnetic Environment—
Guidance
User Manual—Alaris SE Pump, Rev2.X
Models 7100/7130, 7200/7230
Compliance