The uniquely designed pole clamp adapts to a wide variety of
surfaces (such as poles and bed rails) to provide greater
versatility and to simplify transports.
It features:
•
degrees rotation in
360
•
ergonomically designed knob
•
accommodates diameters from
When using multiple instruments, use care to evenly distribute
the instruments, to ensure stability.
Change Pole Clamp Orientation
1.
Press and hold rotation lever.
2.
Reposition clamp.
3.
Release lever at desired position.
1.
The illustrated pole clamp knob might not reflect the knob in use
on the instrument.
User Manual—Alaris SE Pump, Rev2.X
Models 7100/7130, 7200/7230
Start-Up
Secure to Pole
1
-degree increments
90
to
millimeters
15
35
General Setup and Operation
WARNING
To ensure proper occlusion
detection, do not operate the
instrument tilted back more than
45 degrees from the upright position.
B
A
A
B
A
B
B
A
A
B
A
B
Lever
A
B
A
B
67