Displays And Soft Keys - CareFusion Alaris SE User Manual

General Information

Displays and Soft Keys

Main Display
The Main Display is backlit for easy viewing. The backlight
dims when operating on battery power, as an energy-saving
feature. Pressing any key automatically turns the backlight up
again.
Rate Display
The rate display is easily viewed from a distance. It
LED
indicates the current infusion rate(s) in mL/h and flashes to
indicate a hold or alarm condition.
Single channel display:
The status bar indicates which mode the instrument is in:
Optional Modes, Primary, Hold, Secondary, or
Dual channel display:
The status bar indicates which mode the instrument is in:
KVO, Optional Modes, Hold, Primary, or Secondary
Split Screen (Dual Channel Only)
When both channels are infusing, a split screen showing
programmed information for both channels is displayed
automatically after one minute.
Press key to switch immediately to split screen.
A B
Press or key to stop split screen.
A B
O
O
84
Features and Displays (Continued)
CAUTION
Appearance of lines and/or dots
that remain on constantly when the
instrument is powered on might
indicate improper functioning of the
Main Display. Although the
instrument is functioning properly,
return it to qualified service
personnel.
.
KVO
OPT PRI
.
KVO OPT
User Manual—Alaris SE Pump, Rev2.X
Features and Displays
ml/hr
HLD SEC KVO
ml/hr
HLD PRI SEC PRI SEC HLD OPT
OPTIONS
A B
A
B
Pri Pri
Rate=125.0 Rate=130.5
VTBI= VTBI=
DOPamine
10.0 460.0
VI= 0.0 VI= 40.0
Models 7100/7130, 7200/7230
ml/hr
KVO