Alerts - CareFusion Alaris SE User Manual

Troubleshooting and Maintenance
Alert
Battery Low
Check Entry
Checking Line
Complete Entry
Resistance Alert
Additional Alerts:
Additional alerts provide notification of program completion and/or transition to another mode: Dose
Complete (Multi-Dose mode), Loading Dose Complete, Multi-Step Complete, Secondary Complete,
Infusion in or
KVO VTBI
112
Alarms, Alerts, Prompts (Continued)

Alerts

Battery has
charge remaining.
Key press unclear.
Flow is obstructed.
Auto Restart Plus feature is on.
ENTER
a new value.
line resistance reached preset
IV
alert level.
Resistance Alert feature is on.
= .
0
Meaning
minutes or less of
30
was not pressed to accept
Alarms, Alerts, Prompts
Response
Plug power cord into an
as soon as possible.
Press key to continue.
CLEAR
Auto Restart Plus feature must be
on for downstream occlusion alerts
(not required for upstream
occlusion alerts). Check
administration set for probable
cause (such as kinked tubing,
clogged filter).
Press key to confirm entry
ENTER
or press key twice to return
CLEAR
to previous settings.
Note: Channel operates as
previously programmed until
key is pressed.
Check downstream line and site.
Raise resistance alert level, if
appropriate.
User Manual—Alaris SE Pump, Rev2.X
Models 7100/7130, 7200/7230
outlet
AC
ENTER