Table of Contents
Advertisement
LAN Card Parameters
Locally Admin. MAC Addr
5-4
LAN C ard Con figu ration
*
I nterface N umber: 0
*
Typ e
B Locally Ad min MAC Ad dr
Option:
Figure 5-3 LAN Card Configuration Screen
Press
after making any changes, to send the configuration to the LAN interface.
[F7]
If the node is connected to a LAN after this record is created, or if the node
becomes disconnected from the LAN, the LAN connection must be ini-
tialized/re-initialized by opening the LAN Card Configuration record, then
pressing
[F7]
FRM is connected to the LAN before performing this operation.)
Parameter
Locally Adm in. MAC Addr
is a MAC address that will override the universally administered MAC address. If all
zeros are specified, the universal address will be used. Under most circumstances, this
parameter should be left at the default setting.
Ethern et
400000000001
[A],[C],[B]
to send the configuration to the LAN interface. (Be sure the
Table 5-2 LAN Card Parameters
Valid Values
000000000000–7ffffffffffff
Nod e Name=nod exyz
from Main Menu
Default Value
000000000000
Frame Relay Module 4.0 User Guide, Rev 01
Advertisement
Table of Contents
