Table of Contents
Advertisement
SVC Idle Timer
Max VCs to Establish
PVC Connection
Configuring Static IPX Routes
14-16
is a period that an IPX connection can remain active with no traffic before the con-
nection is cleared.
specifies a number of virtual circuits over which IPX traffic will be transmitted in par-
allel.
identifies this interface as one end of a PVC.
Routing of IPX traffic is handled dynamically by such protocols as RIP and SAP, as
well as via static routes configured in the FRM.
To display configured static routes, press
Menu (or
from the Main Menu).
[A], [D], [H]
To configure a route, press
prompted, enter:
:
(RIP) or
Type
0
Route/Service Number
The display will be similar to the RIP example in the following figure. (A SAP record
will display different parameters.)
I PX Rou te Main ten ance
* Type
* Route Number
A Network A ddress
B Hop s
C Tran sport Time
D Router
E Interface
Option::
Figure 14-5 IPX RIP Route Record
at the Connections and Routing Paths
[H]
at the Connections and Routing Paths Menu. When
[I]
(SAP). (The default is
1
:
. (The default is
0–65535
0–RI P
23
0000f0ac
26
30
00000000ff34
5
.)
0
.). This is simply an identifier.
0
Nod e Name=n ode_xyz
[A],[D],[I]
from Main Menu
Frame Relay Module 4.0 User Guide, Rev 01
Advertisement
Table of Contents
