Error Codes Sent To Async Pad Port - Cabletron Systems FRM User Manual

Error Codes Sent to Async PAD Port

Async Terminal Operations
FRM .n.n" Asynchronous PAD
terminal is switched on and DSR and DCD become active. When the node boots, the
software looks for a file named BANNER.TXT (which does not exist when the
software is sent to the customer). If the file is not present, the default banner is dis-
played. Any text editor can be used to create BANNER.TXT, which can consist of up
to 256 bytes of ASCII and
activate ANSI screen functions for line drawings, enhanced characters, etc.) Copy the
file to the OMNI4000 directory, then reboot the node, and the new banner will be in
effect.
Clearing Causes
Number Busy
OCC
Network Congestion
NC
Invalid Facility
INV
Access Barred
NA
Local Procedure Error
ERR
Remote Procedure Error
RPE
Not Obtainable
NP
Out of Order
DER
Invitation to Clear
PAD
DTE Originated
DTE
Reset Causes
DTE Originated
DTE
Out of Order
DER
Remote Procedure Error
RPE
Local Procedure Error
ERR
Network Congestion
NC
DTE Operational
DO
Network Operational
NO
– is the default welcome message, displayed when the
characters. (The
[Esc] [Esc]
characters can be used to
A-5