Table of Contents
Advertisement
Incoming Access Allowed
Outgoing Access Allowed
Add/Change CUG
Delete CUG
Display All CUGs
Configuring Subscriber IDs
Configuring X.25
determines whether this port will be allowed to receive calls from outside its CUGs.
determines whether this port will be allowed to make calls outside its CUGs.
To configure a CUG, select this entry and, when prompted, enter:
,
(the default is
CUG Index
0-99
,
CUG number
1-16383
any other requested information. (See
To delete a CUG, select this item and enter the index (see
CUG to be deleted.
Selecting this item will display a list of all configured CUGs.
This operation configures the called and calling addresses that will be used in call
setup. To complete the connection, the software must recognize where the call is
coming from (calling address) and where it is going (called address).
To display a list of current Subscriber IDs (addresses), press
Routing Paths Menu (or
To add or change a Subscriber ID, press
Menu. When prompted, enter a Subscriber ID of up to 15 digits. (ID conventions are
described on
page
8-22.)
), which is a reference to the CUG.
0
(the default is
), that will be associated with the index.
1
Table 8-1
,
,
from the Main Menu).
[A]
[D]
[A]
at the Connections and Routing Paths
[B]
on page 8-7.)
"Add/Change
CUG") of the
at the Connections and
[A]
8-21
Advertisement
Table of Contents
