Table of Contents
Advertisement
Remote Control via an Async PAD Port
Rebooting the Remote Node
Exiting Remote Control
On-line Operations
Once the ANSI terminal is in
to take remote control of an FRM:
1. Enter the
Remote Control ID
lowed (with no spaces) by the letter
node (also specified in its Node Defaults file). An example of a correct entry for
a
Remote Control ID
2. When the remote node accepts your entry, you will be asked:
Type
y [Enter]
.
3. When prompted, enter the password of the controlled node. The display at the
controlled node will say:
ain Menu at the controlling node will act as the Main Menu of the controlled
M
node, and the displayed remote ID is the ID of the controlled node.
Placing a call through the FRM is described in
Before rebooting, notify all users of this node, since all connec-
tions on all ports will be cleared.
Press
(period) to reboot the node. When asked:
[.]
Press
(comma) to exit remote control. When asked:
[,]
(where
Node Name="NN"
displayed in the upper right hand corner at the remote node, meaning that the remote
node is now under local control (control at its own screen).
If the controlled node detects that the remote control line failed during a remote
control session, remote control will be terminated and the remote node's local Main
Menu will be displayed on its screen.
mode
(see page A-1), follow this procedure
Command
of the node (specified in its Node Defaults file), fol-
and the
d
of
and a password of
1234
Under remote control. Keyboard blocked by id = "n."
is the
"NN"
Node Name
Remote Control Password
is
remote
1234dremote
Are you a PAD user?
Appendix
A.
Remote reboot the node?
Stop remote control?
configured in Node Defaults) will be
of the
.
The
, press
.
[Y]
, press
.
[Y]
18-3
Advertisement
Table of Contents
