Bridge Mac Filter Parameters; Bridge Sap Filter Parameters - Cabletron Systems FRM User Manual

Filter Name
Source MAC Address Value
Destination MAC Address Value
Filter Name
SSAP Value
DSAP Value
Configuring Bridging
Table 15-3 Bridge MAC Filter Parameters
Parameter
Filter Name
Source MAC Address Value
Source MAC Address Mask
Destination MAC Address Value
Destination MAC Address Mask
helps the user identify the filter. The name is not used by the software.
is the MAC address in the source address field of the frame.
is the MAC address in the destination address field of the frame.
Table 15-4 Bridge SAP Filter Parameters
Parameter
Filter Name
SSAP Value
SSAP Mask
DSAP Value
DSAP Mask
helps the user identify the filter. The name is not used by the software.
identifies the source Service Advertising Protocol (SAP).
identifies the destination SAP.
Valid Values
1–31 characters
0–ffffffffff (6 bytes)
0–ffffffffff (6 bytes)
0–ffffffffff (6 bytes)
(6 bytes)
0–ffffffffff
Valid Values
1–31 characters
(1 byte)
0–ff
0–ff
0–ff (1 byte)
0–ff
Default Value
none
ffffffffff
ffffffffff
ffffffffff
ffffffffff
Default Value
none
0
0
0
0
15-9