Bridge Port Statistics; Bridge Port Status Display - Cabletron Systems FRM User Manual

Bridge Port Statistics

Information on the Bridge Port Statistics Display:
20-10
Press at the Bridge Status Displays Menu to display the configurational and oper-
[A]
ational status of all Bridge ports in the node:
Bridge Port S tatus Display
Bridge I d: 0010.00000364439B
Nu m Type/Format Statu s
0 Ethern et Active
1 Token R in g Active
2 Frm/Nat LLC 2 Active
3 Frm/8023/TB Active
PgUp PgDn F2:More In fo
Figure 20-8 Bridge Port Status Display
To display statistics for the Bridge ports on the above screen, press
or will display other statistics screens (if there are more), and pressing
[PgUp] [PgDn]
will return the display to Figure 20-8.
[F2]
Bridge Status Displays
– identifies the interface type (LAN or frame relay) and (if frame
Type/Format
relay) frame format (Native LLC2 or 8023_TB, as configured in the Port
record).
– is the bridge selected as
DesignatedRoot
selection of root is determined by the bridge with the lowest Bridge ID, which
consists of a
Bridge Priority
DesignatedBridge
bridge.
– is the number of frames discarded because of excessive delay.
DlyExceeded
– is the number of transmitted frames.
OutFrames
InCfgShort – is the number of received Configuration BPDUs (Bridge Protocol
Data Units) that were dropped because they were too short.
– is the number of transmitted Configuration BPDUs.
OutCfgBPDU
Root Port: 255
Bridge State R eceive
D is abled 4294967296
Listening 4675561234
Learning 4561230000
Blocking 4561231100
F3:Exit
[C],[F],[D],[A]
are described on page 19-21.
and MAC address.
– is the bridge connecting to the least-cost path to the root
N ode Name=n ode_xyz
X mit
4294967296
4675561234
4562222100
4561231100
from Main Menu
. Pressing
[F2]
in the spanning tree. The
Root
Frame Relay Module 4.0 User Guide, Rev 01